FANUC Axis Servo Control Circuit Board DA16B-2200-0360/04B

( Brand: Fanuc ), ( Manufacturer Part Number: DA16B-2200-0360 ), ( Model: DA16B-2200-0360/04B ), ( Part Type: Servo Control Circuit Board ), ( Country Of Manufacture: Japan )

Review FANUC Da16b-2200-0360/04b Axis Servo Control Circuit Board

The **FANUC DA16B-2200-0360** and **DA16B-2200-0360/04B** are high-performance **axis servo control circuit boards** designed exclusively for FANUC s advanced CNC (Computer Numerical Control) systems, specifically tailored for use in **Series 0i, 0i-A, 0i-AE, 0i-F, 0i-FE, 0i-TE, 16i, 16i-A, 16i-B, and 16i-C** controllers. These circuit boards serve as the critical interface between the CNC s control logic and the servo motors, enabling precise motion control, positioning accuracy, and seamless integration within automated manufacturing, robotics, and industrial machining applications. Engineered with FANUC s proprietary **high-speed digital signal processing (DSP) technology**, the DA16B series delivers exceptional responsiveness, minimal latency, and superior torque control, making them indispensable for high-speed milling, turning, pick-and-place systems, and other demanding motion control tasks.

The **DA16B-2200-0360** and its variant, the **DA16B-2200-0360/04B**, are **dual-axis servo control modules**, each capable of independently managing two servo axes with unparalleled precision. These boards incorporate **FANUC s Servo Drive Technology**, featuring **16-bit resolution** for position feedback, **high-frequency PWM (Pulse Width Modulation) output**, and **adaptive current control algorithms** to optimize motor performance across varying load conditions. The **04B variant** includes additional enhancements, such as improved **bus communication protocols** (including FANUC s proprietary **i-Bus** and **Ethernet/IP** compatibility) and expanded **diagnostic capabilities**, allowing for real-time monitoring of servo health, fault detection, and predictive maintenance critical for minimizing downtime in production environments.

Constructed with **rugged, high-reliability components**, these circuit boards are built to withstand the harsh conditions of industrial settings, featuring **wide operating temperature ranges** (typically -10 C to 55 C) and **EMI/ESD protection** to ensure stable operation in electrically noisy environments. The **DA16B series** supports a broad spectrum of **FANUC servo motors**, including ** i, i-S, i-S2, and i-S3** models, as well as third-party motors through compatible interfaces, providing flexibility for system integrators and OEMs. The boards also incorporate **FANUC s advanced motion control algorithms**, such as **smooth acceleration/deceleration profiles, velocity tracking, and position interpolation**, which enhance machining efficiency and surface finish quality in CNC applications.

For maintenance and compatibility, the **DA16B-2200-0360** and **DA16B-2200-0360/04B** are designed with **hot-swappable functionality**, allowing for quick replacement without disrupting the entire CNC system. They are fully backward-compatible with existing FANUC control architectures while supporting **future-proofing features**, such as **expanded memory buffers, enhanced bus speeds, and compatibility with FANUC s next-generation CNC firmware updates**. Whether deployed in **high-speed machining centers, robotic arms, or automated assembly lines**, these servo control boards ensure **consistent, repeatable motion control**, reducing errors, improving productivity, and extending the lifespan of servo-driven systems. Their seamless integration with FANUC s ecosystem of controllers, drives, and peripherals makes them a cornerstone of modern industrial automation, delivering the performance and reliability required for next-generation manufacturing.

### **Pros and Cons of Buying a Used Fanuc DA16B-2200-0360 (or DA16B-2200-0360/04B) Axis Servo Control Circuit Board**

#### **Pros**

1. **Cost-Effective Alternative to New Parts**

- New Fanuc servo control boards can cost several thousand dollars, whereas used or refurbished units may be available for a fraction of that price. This makes them attractive for budget-conscious buyers, especially in industrial maintenance or retrofitting projects.

2. **Compatibility with Existing Systems**

- These boards are designed for Fanuc CNC systems (particularly older models like the **0i, 0i-Mate, 16i, 18i, or 21i-T**) and are often interchangeable with identical or similar models. If the original board fails, a replacement ensures continued operation without requiring a full system upgrade.

3. **Proven Reliability (If in Good Condition)**

- Fanuc servo control boards from the **DA16B series** (introduced in the late 1990s to early 2000s) are well-engineered and widely used. If sourced from a reputable seller with proper testing, they can provide years of reliable service.

4. **Easier Availability Than Rare Parts**

- Some newer or specialized Fanuc servo boards are harder to find due to obsolescence. The **DA16B-2200** is a common model, increasing the likelihood of availability compared to newer or discontinued variants.

5. **Potential for Refurbishment**

- If the board is faulty but repairable, skilled technicians may restore it to working condition. This can be more economical than purchasing a new unit, especially if the issue is minor (e.g., a failed capacitor or connector).

6. **Lower Risk of System Downtime (If Replaced Promptly)**

- In industrial settings, even a short machine downtime can be costly. Replacing a failed servo board quickly (even with a used unit) can minimize production losses.

---

#### **Cons**

1. **Reliability Risks with Used/Unverified Units**

- **No warranty or return policy** Unlike new parts, used boards may have hidden defects (e.g., failed capacitors, corroded traces, or damaged connectors) that only become apparent after installation.

- **Lack of testing** Some sellers may not provide proof of functionality, leading to failures during operation.

- **Age-related wear** Even if the board works initially, older components (e.g., electrolytic capacitors, resistors) may degrade over time, leading to intermittent issues.

2. **Potential Compatibility Issues**

- While the **DA16B-2200-0360** is widely compatible, slight variations in firmware or mechanical connections (e.g., **0360 vs. 04B axis**) could cause problems if not matched correctly.

- Some newer CNC models may require updated firmware or additional drivers, which could complicate integration.

3. **Limited Support and Diagnostics**

- Fanuc s official support for older models is minimal, and troubleshooting a used board may require reverse-engineering or reliance on third-party forums.

- If the board fails shortly after purchase, diagnosing the issue without Fanuc s documentation can be challenging.

4. **Risk of Counterfeit or Salvaged Parts**

- The used market for industrial components is prone to counterfeit or salvaged (e.g., from scrap yards) parts. These may lack proper testing or could be repurposed from non-functional machines.

- **No guarantee of authenticity** Some sellers may claim a board is original when it is a clone or modified version.

5. **Potential for Hidden Costs**

- **Additional components may be needed** Replacing a servo board often requires matching servo amplifiers, cables, or firmware updates, which can add to the total cost.

- **Calibration and tuning required** After installation, the system may need recalibration, which could involve downtime and labor costs.

- **Warranty void** Most used parts come with no warranty, meaning any post-installation failures are the buyer s responsibility.

6. **Environmental and Safety Concerns**

- If the board has been exposed to moisture, dust, or electrical surges, it may pose risks such as short circuits or data corruption.

- Improper handling during transport could damage delicate components (e.g., solder joints, connectors).

7. **Obsolescence and Future Upgrades**

- Even if the board works now, Fanuc may discontinue support for these older models, making future repairs or upgrades difficult.

- If the machine is part of a modernized system, integrating an old servo board could limit scalability or automation capabilities.

---

### **Ending Conclusion**

Buying a used **Fanuc DA16B-2200-0360 (or 04B) servo control circuit board** can be a **cost-effective solution** for maintaining or repairing older CNC machines, especially when new parts are prohibitively expensive. However, the risks particularly **reliability, compatibility, and lack of support** must be carefully considered.

1. **Verify the board s condition** Request **test reports, photos of working components, or a live demo** before buying.

2. **Check the seller s reputation** Prefer sellers with **verified reviews, warranties, or return policies** (e.g., authorized Fanuc refurbishers or trusted industrial parts dealers).

3. **Ensure compatibility** Confirm that the **firmware, connectors, and axis type (0360/04B)** match your system s requirements.

4. **Consider refurbished over "as-is"** A **professionally refurbished** board (with replaced capacitors, testing, and calibration) is a safer bet than a used unit with no guarantees.

5. **Budget for additional costs** Account for **calibration, spare parts, or potential rework** if issues arise post-installation.

- **For critical or high-value machines**, prioritize **new or refurbished OEM parts** from authorized Fanuc distributors to ensure reliability and support.

- **For non-critical or legacy systems** where cost is the primary concern, a **used board from a trusted source with testing documentation** may be acceptable, provided you are prepared for potential risks.

- **Rent or lease** a new servo board temporarily if budget is a constraint.

- **Explore third-party compatible boards** (e.g., from companies like **Servo2Go, Motion Control Components**) that may offer better support than generic used units.

- **Check for Fanuc s "Used Parts" program** (if available), which may offer slightly used but tested components with limited warranties.

Ultimately, the decision depends on **risk tolerance, budget, and the criticality of the machine s operation**. If possible, **minimize reliance on used parts for safety-critical applications** where downtime could have severe consequences.

Details:

After the return period has ended, you can no longer product. Items in Lot: Consignee: B. DOMESTIC SHIPPING: The shipping price is shown for US lower 48 states.

Will there be a dock or forklift. Brand: Fanuc. Condition: Used. Next Day Second Air Services are available.

Need it urgently. Your phone number and business name. LOCAL PICK-UP, Prefer to pick it up yourself. Weight lbs, oz: 1,10.

Model: DA16B-2200-0360/04B. All goods are so AS IS' and WITH ALL FAULTS meaning, without limitation, that. Country of Manufacture: Japan.

We choose the carrier.

part #: da16b22000360 prices

• $229.99-$450.00

specifications sensoindustria:

• brand: Fanuc
• mpn: Da16b-2200-0360
• model: Da16b-2200-0360/04b
• part type: Servo Control Circuit Board
• country of manufacture: Japan

returns sensoindustria:

• time: 30 Days
• paid by: Buyer
• policy: Returns Accepted
• method: Money back

offer sensoindustria:

• best offers: True
• sold: 0
• quantity: 1
• started: April 9, 2026
• options: Ship-to-home
• availability: In Stock

seller sensoindustria:

• city: Middlebury, Indiana
• # reviews: 64115
• rating: 99.8%

shipping sensoindustria:

• cost: $15.99
• service: USPS Priority Mail
• carrier: USPS
• class: Expedited
• transit: 4-9 Days
• type: Fixed

general sensoindustria:

• condition: Used
• PLCs HMIs > PLC Peripheral Modules > PLC Input Output Modules

payments sensoindustria:

• other
• wallet: Paypal
• credit card: Diners-club

Fanuc DA16B-2200-0360 Is Similar To:

• 44a717545-g01 Ge Fanuc Control Board (34.5% similar) Ge Fanuc control board - 44A717545-G01 IC600CB516...(October 19th, 2018)
• 44a747833-001r02-2 Ge Fanuc Control Module (27.6% similar) Ge Fanuc 44A747833-001R02 2 control module NBT1A3, 44A747832-G01...(July 17th, 2018)
• 67767 A14b-0070-b104-01 A20b-0007-0340-06a Ge Japan Fanuc Input Unit Power Board Horner Electric (18.8% similar) Ge Fanuc PU67767 A14B-0070-B104-01 input unit A20B 06A power board combo...(April 8th, 2018)
• A03b-0801-c058 Fanuc Robot Control Module (31.3% similar) Fanuc robot control module RC01A A03B-0801-C058 IN1302...(September 17th, 2018)
• A03b-0801-c462 Fanuc Robot Control Module Tb (30.5% similar) Marketing, listing apps, application. This item is used. Fanuc A03B-0801-C462 RC01C robot control module A03B0801C462 tb 5A1 manufacturer: Fanuc model: A03B-0801-C462TYPE: used, in working condition...(October 13th, 2018)
• A06b-6058-h006 Fanuc Spindle Servo Amplifier (30.5% similar) Fanuc A06B-6058-H006 spindle servo amplifier A06B6058H006 PRJ9 manufacturer: Fanuc model: type: used, in working condition. Marketing, listing apps, application. This item is used...(August 31st, 2018)
• A06b-6059-k031 Fanuc Spindle Servo Amplifier (30.5% similar) Marketing, listing apps, application. Fanuc A06B-6059-K031 spindle servo amplifier A06B6059K031 GW36 manufacturer: Fanuc model: A06B-6059-K031TYPE: used, in working condition. This item is used...(March 7th, 2018)
• A06b-6066-h004 Fanuc Servo Amplifier Module (29.1% similar) This item is used. Marketing, listing apps, application. Fanuc A06B-6066-H004 servo amplifier module A06B6066H004 PRI39 manufacturer: Fanuc model: A06B-6066-H004TYPE: used, in working condition...(March 1st, 2018)
• A06b-6079-h207 C Fanuc Servo Amplifier (28.6% similar) Fanuc A06B-6079-H207 c servo amplifier module A06B6079H207 PRI39 manufacturer: Fanuc model: type: used, in working condition. Marketing, listing apps, application. This item is used...(December 4th, 2017)
• A06b-6124-h104 B Fanuc Servo Amplifier (28.6% similar) This item is used. Fanuc A06B-6124-H104 b servo amplifier module AIs 40HV A06B6124H104 GW27 manufacturer: Fanuc model: type: used, in working condition. Marketing, listing apps, application...(September 27th, 2017)
• A16b-1210-0820-03a Fanuc Board (21.2% similar) Alternations or removal of any components a part voids the 30-DAY return privilege. Once we get the return, will inspect item to make sure it is in same condition as shipped. This is both FedEx and ups rules. Boxing handling plus shipping costs from zip 49534. Boxing handling processing plus ...(January 25th, 2019)